Western Steel & Wire S&L Sign Stake W Compression Step, Angled Tip and Rounded End, Patent Pending – Each (10, 24 INCH)

Sale!

$49.99

  • Patent pending S&L Sign Stake has a 3″ bent “L” step that allows more force (foot) to be applied to the stake and an angled end cut for easier insertion into the ground. The stake is rounded on the other end for easy insertion into signage. This stake also has an “S” bend to position the sign and stop the signage from falling down the stake.
  • #9 Galvanized, Hard Tensile Wire for rigidity and zinc coating for protection against rust & corrosion.
  • These frames are reusable and work well with 4 mm or 5 mm corrugated plastic signs
  • Manufactured and distributed by Western Steel & Wire
SKU: wsw003 Category:

Description

These are our patent pending S&L Sign stakes with a 3” compression step, rounded top ends and angled bottom tips for easy insertion into signage and the ground All existing stakes have straight ends which make it difficult for insertion. Some stakes have welded cross members which break or bend significantly when a force is applied during ground insertion.

The 3” bent “L” step can be stepped on with a greater force, without bending the stake. In combination with the angled tip, insertion is easier and faster, even on harder ground.

These stakes also have an “S” bend that stops the signage at a specific length from the top of the stake, securely holding the signage onto the stake.Using one or more of these patent pending S&L Sign Stakes will allow for easier insertion into the ground and into signage without damaging the signage and allowing stakes to be reusable saving time and money.

*Caution: Angled tips are sharp – care should be used when handling the sign stake. Ensure rounded ends are inserted into the signage and angled tips are inserted into the ground.

SPECIFICATIONS

  • Galvanized wire, Hard, Regular coat per ASTM A764
  • Diameter: #9 (.1483”) +/- .001 in
  • Tensile Strength: >200 ksi
  • Zinc Coating: 25 – 30 g/m2
  • 45° machined bottom angles
  • 1/8” mechanical rounded top ends

Product information

Leave a Reply